Enable Virtualization on HP ProBook 4530s

I tried to install HyperV on my new HP ProBook 4530s but it fails with error message: hyper-v is disabled in the firmware.

I enabled the parameter virtualization technology in BIOS but it still fail, the solution was to change BIOS Security Settings from View to Change for virtualization.
Share on Google Plus

About Vittorio Pavesi

    Blogger Comment
    Facebook Comment

12 commenti:

Anonymous said...

Thx. I had done this but until reading this post had not realised that the 'Hypervisor is present' feature did NOT need to be starred in Coreinfo. Provided that the SLAT / EPT feature is enabled/starred.

For anyone else as ignorant as myself, this only gets enabled by the installer ;-)

Unknown said...

Thank you. This work for me :)

bMAO said...

Ciao, puoi spiegarmi meglio cosa hai cambiato nel BIOS per risolvere il problema? Io ho un ProBook 4540s e quando installo Hyper-V al riavvio si blocca in eterno. Ho abilitato la virtualizzazione nel BIOS e niente altro. GRAZIE!!
--
Hi, can you please explain better what you've changed in the BIOS to solve the problem? I own a ProBook 4540s and when I install Hyper-V the following reboots hangs forever. I have enabled the virtualization in the BIOS and nothing else. THANKS!!

Vittorio Pavesi said...

You must enter BIOS, then go to System Configuration, Select Virtualization Technology menu and set value to "Change"

bMAO said...

Hi, I've tried this, but it was not enough. Everything works fine UNTIL I install the bluetooth drivers... in that case the boot sequence hangs forever or, in my second installation, I even receive the BSOD! At the end I formatted the pc and installed all the drivers except the bluetooth and everything's fine.

Filip Voska said...

I had to make the following changes in BIOS in order to make it work on my HP 4530s
1. System Configuration > Device Configurations > Virtualization Technology <-- ENABLE this
2. System Configuration > Set Security Level > Data Execution Prevention <-- set to Change
3. System Configuration > Set Security Level > Virtualization Technology <-- set to Change

Unknown said...

Thank you, Filip Voska, it works for me :>

Unknown said...

Thank you, Filip Voska, it works for me :>

Katowiczanin said...

Thank You - it worked

Clueless said...

This still doesn't work please. System Information still shows Virtualization-based security Enabled but not running.
Hyper-V -Virtualization Enabled in Firmware No

And I really need to be able to run an AVD in Android Studio. Somebody please help me. I use an HP Probook 4530s running Windows 10

enable virtualization in windows 10 said...

One of the most appreciated features in Windows 10 is the option to enable virtualization in windows 10. Windows has its own platform for making this Virtualization happen, which is called Hyper-V.

Anonymous said...

When the vendor's upcard is a good one, a 7, 8, 9, 10-card, or ace for example, the player should not cease drawing until a total of 17 or more is reached. When the vendor's upcard is a poor one, 4, 5, or 6, the player ought to cease drawing as quickly as he gets a total of 12 or higher. The strategy here is never to take a card if could be} any likelihood of going bust. The need with this poor holding is to let the vendor hit and hopefully go over 21. Finally, when the vendor's up card is a fair one, 2 or three, the player ought to cease with a total of 13 or higher. Players could make bigger bets once they have an 메리트카지노 advantage.